Wasp WPL608 User Manual page 43

Paper Len.
00812 dot
Bline Size
0024 dot
Bline Mode
Pre-Printed
1. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the paper length into the
printer.
2. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the bline size into the
printer.
3. Then, printer will feed labels to
calibrate the sensor sensitivity
automatically. When calibration is
completed, the LCD screen will return
to the previous menu.
40
button to move
button to set
button to move
button to set