VIA Technologies VB8001-16 - VIA Motherboard - Mini ITX User Manual page 47

Chapter 3
AC97 Audio
Auto allows the mainboard to detect whether an audio device is used. If
the device is detected, the onboard VIA AC'97 (Audio Codec'97) con-
troller will be enabled; if not, it is disabled. Disable the controller if
you want to use other controller cards to connect an audio device. Set-
ting options: Auto and Disabled.
VIA-3043 OnChip LAN
Decide whether to invoke the boot ROM of VIA-3043 onchip LAN.
Settings: Enabled and Disabled.
USB Keyboard Support
Enable USB Keyboard Support for DOS and Windows 95. Settings: En-
abled and Disabled.
Onboard Parallel Mode
Set the parallel port mode. To operate the onboard parallel port as Stand-
ard Parallel Port, choose "SPP." To operate the onboard parallel port in
the EPP mode, choose "EPP." By choosing "ECP", the onboard parallel
port will operate in ECP mode. Choosing "ECP + EPP" will allow the
onboard parallel port to support both the ECP and EPP modes simulta-
neously. Settings are:
Normal :
EPP :
ECP :
ECP + EPP:
ECP Mode Use DMA
ECP utilises a DMA channel. This field is only available if Parallel Port
Mode is set to "ECP". Select DMA channel for ECP use.
Standard Parallel Port
Enhanced Parallel Port
Extended Capability Port
Extended Capability Port + Enhanced Parallel Port
3-14