LAN Console
This section describes how to configure a notebook PC as a console via a LAN cable connection. This process
uses a terminal emulator software package set to emulate a VT100 terminal.
The rp24xx server must first be configured via an HP700 system console before accessing it
NOTE
from a PC or UNIX system.
1. Connect a cable between the notebook PC network adapter and the 10BaseT LAN Console port on the
rear of the rp24xx server.
2. Launch the terminal emulator software and set emulation to VT100.
3. Connect to the rp24xx server Guardian Service Processor (GSP) by entering its IP address and press
or
<ENTER>
<RETURN>
Chapter
.
LAN Console
141