Win Path - HP A4500A - VMEbus Single Board Computer 744 Motherboard Hardware Manual

System Power Down
1. Stop all active applications that may be running and Log Off all users.
2. Perform a system backup of the entire Operating System and data base. If this is not feasible, perform a
backup of the data base. (Backups should be performed at a scheduled interval as common practice for
protecting any new data or changes to the existing data base.)
3. To shut down the OS, enter, "/etc/shutdown -h" at the prompt.
4. At the rear of the computer, press and release the on/off switch to power-down the server.
NOTE Housekeeping voltage is still present after switching power off. Unplug the power cord to
completely remove power.
5. Unplug the power cord from the server.
100-240V~, 600W
6.0-2.6A, 50-60Hz
Ultra2 Wide SCSI
Path: 0/0/1/0
On/Off Switch
ccrr012
Chapter
GSP Reset TOC
A
B
Narrow Single Ended SCSI 10/100BASE-T
Path: 0/0/2/0 Path: 0/0/0/0
Power Cord Receptacle
10BASE-T Console/
LAN Console UPS Port
System Power Down
win
win
Path: 0/2/0 Path: 0/4/0
urbo urbo
Path: 0/6/2 Path: 0/6/0
121