HP A4500A - VMEbus Single Board Computer 744 Motherboard Hardware Manual page 76

Installing a Stand-alone Server in a Cabinet
Step 3. Fit the plastic end caps over the metal brackets as shown below.
Step 4. Push the server back into the cabinet until it is flush against the vertical columns. Replace the
screws that fasten the server to the rack.
Step 5. Attach the bezel to the front of the server. The cabinet-mounted server will now look like the
picture shown below.
Installation In Third-Party Racks
Overview
HP has qualified the rack systems of several vendors as suitable for rp24xx server installation.
84
Chapter