Guardian Service Processor Replacement
Guardian Service Processor Replacement
The GSP card resides on the System Board at the rear left center, under the short PCI I/O card (slot 1), which
must be removed for access.
To replace the GSP, perform the following steps:
Step 1. Grasp the card by the left and right edges and press it gently into its socket on the System Board.
Step 2. Insert and tighten the four mounting screws that hold the GSP card in place.
The following picture shows a GSP installed in a server.
The following graphic shows the location of a GSP in the server.
289
Chapter