3. Connect the BNC T assembly to the ThinLAN connector on the console/LAN card, and
cover it with a fabric anti-static cover.
4. For T-Class and 99xCX Systems (Figure 3-17):
a. Connect another BNC T connector to the connector labeled LAN interface on the
back of the DTC.
b. Connect the cable from the console/LAN card to the BNC T connector on the DTC.
Figure 3-17
Connecting LAN/Console Card to DTCs (T-Class and 99xCX)
5. For 99xDX Systems (Figure 3-18):
a. Connect another BNC T connector to the LAN connector on the back of the
OpenView PC.
b. Connect the cable from the console/LAN card to the BNC T connector on the
OpenView PC.
Chapter 3
Installation
Internal SPU Cabinet Connections
3-35