HP A4500A - VMEbus Single Board Computer 744 Motherboard Hardware Manual page 67

Unpack the Server
Overview
Unpacking the server consists of opening and unloading the carton. Inside the carton you will find, in
addition to the server, an accessory kit and a packet containing installation instructions and regulatory
information.
The following instructions do not apply to servers that are received pre-installed in a cabinet.
NOTE
These procedures pertain to individual servers only.
Open and Unload the Carton
Step 1. Place the sealed carton on a work surface with the correct side up as indicated by the, "This Side
Up" symbol (shown below).
WARNING
Step 2. Carefully open the carton, remove the contents, and set them on the work surface. Each carton will
contain:
❏ The server.
❏ A plastic pedestal base for holding the server in a side-mounted position
❏ An accessory kit.
❏ A packet containing installation instructions and regulatory information.
Report any missing items to your local Hewlett-Packard office immediately. If there is obvious
NOTE
freight damage, contact your shipper immediately.
We recommend that you retain all packing materials in case any of the items received require
return to Hewlett-Packard.
Unpack the Server
WARNING The rp24xx server weights 22.68 kg (50 lbs). Take necessary precautions to prevent
muscle strain when lifting or carrying the server.
Chapter
Use sharp instruments carefully when unpacking electronics equipment.
Failure to follow this precaution may result in personal injury or damage to
components.
Unpack the Server
75