Date; Default Configuration; Display Fruid; Disconnect Remote Or Lan Console - HP Integrity rx1620 Operation Manual

This command allows the local or remote port user to connect over the MP LAN to another MP
on the network. The user that launches the command is given a private connection to the other
MP over the LAN. To return to the original MP, type CTRL+] to disconnect the CSP session.

Date

DATE: Displays the current date, as generated in the MP real-time clock.

Default Configuration

DC: Default Configuration—reset all MP parameters to the default configuration
This command sets all MP parameters back to their default values. The user may reset all or a
subset of the following parameters:
• IP configurations
• Modem configuration
• Paging configuration
• Command Interface configuration
• Disable remote access, security configuration
• Session configuration. For example: setting the security configuration to default erases all
users and passwords.
There are three ways to reset passwords in the MP:
1. In the SO command, change individual users.
2. In the DC command choose "Reset Security Configuration".
3. Forgotten passwords can be reset by pressing the MP reset button on the back panel of your
HP Server. After the MP reboots, the local console terminal displays a message for five
seconds. Responding to this message in time will allow a local user to reset the passwords.
NOTE:

Display FRUID

DF: Display FRUID information
This command displays FRUID information from the BMC for FRU devices. Information provided
includes serial number; part number; model designation; name and version number; and
manufacturer.

Disconnect Remote or LAN Console

DI: DIsconnect remote/modem or LAN/WEB console
This command disconnects (hang up) the remote/modem or LAN/WEB users from MP. It does
not disable the ports. The remote console is no longer mirrored.

MP Firmware Update

FW: Activates MP firmware upgrade mode
This command is available from either the LAN or local serial port. This command activates
firmware upgrade mode, which loads new firmware through the MP LAN by FTP (which must
be operational). An MP Reset is generated after the upgrade is complete.

Help

HE: Display help for menu or command
This command displays the MP hardware and firmware version identity, and the date and time
of firmware generation. If executed from the MP Main Menu, general information about the MP,
All user information (logins, passwords, and so on) is erased in methods 2 and 3.
Management Processor Command Interface 65