Spectra Logic T-Series Spectra T950 User Manual page 76

Filling the Storage Pool
Once the library is in use, you typically use only the backup software to move media
within the library. However, when you first install the library and create a partition,
you may want to quickly fill the storage pool.
Note: If your backup software requires that it control media imports into
a new partition, proceed to Filling the EE Pool (for Tape Media
Only) on page 78. Follow the instructions there, then use your
backup software to move the media from the EE pool into the
storage pool.
Follow these steps to fill the storage pool.
1. Have on hand the full TeraPack containers or RXT media packs for the storage
pool. These tapes are available for immediate use by the backup software.
2. From the toolbar menu, select General > Import/Export. The Import/Export
TeraPacks screen displays (Figure 6-2).
Figure 6-2 The Import/Export TeraPacks screen.
3. From the Partition drop-down menu, select the partition into which the tapes
are to be imported, then select Go.
Chapter 6. Loading Media for the First Time
76