Spectra Logic T-Series Spectra T950 User Manual page 118

2. Select Calibrate Fans; the screen refreshes to show the details of the Calibrate
Fans diagnostic (Figure 12-5).
Figure 12-5 The Calibrate Fans diagnostic details.
3. Select whether to email the results or save to a USB device.
4. Use the drop-down menu to select Calibrate Fans For New Filter.
5. Specify the frame on which the utility is to run, if your library has more than
one frame.
6. Select Run Utility; a progress bar appears showing the progress of the utility.
7. Select Run Utility; a progress bar appears showing the progress of the utility.
This utility takes five to ten minutes. When complete, the Utility Results screen
appears, informing you that the process is complete.
Note: Spectra Logic recommends that you clean all of the library's tape
drives after replacing the air filter.
Note: Spectra Logic recommends keeping a new fan filter on site to use
for replacement as often as is necessary. To purchase a new fan
filter, contact your sales representative or visit the Spectra Logic
Web site.
Chapter 12. Maintaining the Library & Drives
118