Chapter 1. Introduction - Spectra Logic T-Series Spectra T950 User Manual

Library Hardware Configuration
The Spectra T950 library is installed at your site by Spectra-Logic-certified engineers.
Caution: The library should always be installed on a hard flooring, such
as tile—never on carpeted flooring.
Once the library has been installed, do not alter its component or drive configuration,
unless you either:
• Have been directed to do so by Spectra Logic, or
• Have a support contract such as Assisted Self-Maintenance (ASM)
and you have documentation instructing you on the hardware or component
reconfiguration procedure.
If you do not have a current support agreement and related documentation, contact
Spectra Logic Technical Support before altering your library hardware. This way you
can make sure that internal components, including drive covers, are re-installed
correctly to ensure proper thermal control, air flow, and dust filtering.
Note: The power cord included with this unit is considered part of this
unit and cannot be used with any other equipment.

Chapter 1. Introduction

12