Spectra Logic T-Series Spectra T950 User Manual page 160

2. Select Maintenance > Package Update. The Package Update screen appears
(Figure 15-1).
Figure 15-1 The Package Update screen.
3. Select Manage Package Servers. The Manage Package Servers screen appears
(Figure 15-2).
Example
of a local
package
server
Figure 15-2 The Manage Package Servers screen.
For each package server available, the Package Servers portion of the screen
shows the Server Name on the left, then it shows the IP Address, Proxy, and
Directory next to the server name. Figure 15-2 shows a library that has already
been configured with two local firmware package servers.
• To add a new server, use the Add/Update Server portion of the screen.
Fill in the information required in the Name, Address, Proxy, and Directory
fields, then select Save; the screen refreshes to show the new server in the
list at the top of the screen. Make sure to specify a directory including the
full path to the folder where the firmware package is located.
• To edit a server, select Edit next to that server's name and details. Change the
server information as necessary, then select Save.
• To delete a server, select Delete next to that server's name and details. Note
that there is no confirmation for the deletion; once Delete is selected, the
server disappears.
Chapter 15. Advanced Configuration & Use
160