Spectra Logic T-Series Spectra T950 User Manual page 131

New Feature: Saving the Library's Configuration
You can optionally store the library's configuration, either by saving it to a USB device
or by e-mailing it to one of the library's configured mail users.
To save the library's configuration:
1. Select Maintenance > Tools > Utilities. The Utilities screen appears.
2. Select Show Advanced, then select Next in the Advanced Utility Confirmation
screen. The Utilities screen refreshes to show a long list of advanced utilities.
3. Select Save Library Configuration. The screen refreshes to show the details for
that utility (Figure 13-8).
Figure 13-8 The Utilities screen, showing the details of the Save Library
Configuration utility.
4. Use the drop-down menu to select where you would like to send the
configuration information—either to a USB device or to a configured e-mail
recipient.
5. Select Run Utility.
After a brief delay, the Utility Results screen appears, showing that the
configuration file was either saved or sent.
Chapter 13. Library Troubleshooting
131