Important Unpacking Instructions - Cuisinart FP-12 - Elite Food Processor Instruction Booklet

IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart Elite
™
Collection 12-Cup (3 L) Food Processor and
the accessories for it:
12- (3 L) and 4-cup (1 L) work bowls, work bowl
cover, large and small metal chopping/mixing
blades, dough blade, adjustable slicing disc,
reversible shredding disc, stem adapter, large
and small pushers, spatula, instruction/recipe
book and How-to DVD.
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP
EDGES. To avoid injury when unpacking the
parts, please follow these instructions.
1. Place the box on a low table or on the floor
next to the kitchen counter or table where
you intend to keep the food processor.
Be sure the box is right side up.
2. Open top flaps and remove the cardboard
insert and the instructional material. You will
see a rectangular block of plastic foam that
holds the processor parts and DVD, each
fitted into cavity in the foam.
The spatula (A) and dough blade (B) are in
cavities at one short side of the foam block.
The How-to DVD (C) is in a cavity at other
short side of the foam block. Remove them
first.
The bowl cover (D) and large/small pushers
(E) are in cavities at centre of foam block.
Grasp the edge of the bowl cover and lift it
straight up, removing it next. Lift out the
large/small pushers from its space under
the bowl cover on the foam block.
The adjustable slicing disc (F) and
reversible shredding disc (G) are on either
long side of the foam block. Slide them out
of their grooves WITH GREAT CARE. THE
BLADES ARE VERY SHARP.
Remove the large metal chopping/mixing
blade (H) from the foam block.
CAREFULLY REMOVE IT BY GRASPING
THE CENTRE WHITE HUB AND LIFTING
IT STRAIGHT UP. NEVER TOUCH THE
BLADE, AS IT IS RAZOR SHARP.
3. Lift out the plastic foam block.
4. The housing base with 12- (3 L) and 4-cup
(1 L) work bowls and small metal chopping/
mixing blade are at the bottom of the box.
CAREFULLY REMOVE SMALL METAL
CHOPPING/MIXING BLADE BY
GRASPING THE CENTRE WHITE HUB
AND LIFTING IT STRAIGHT UP. NEVER
TOUCH THE BLADE, AS IT IS RAZOR
SHARP. Then pull out the stem adaptor to
the motor shaft.
5. Remove the base and bowls together by
grasping the handle and lifting straight up.
Do not rotate the bowl clockwise on the
base. This will cause the bowls to separate
from the base.
6. Place the food processor on the counter or
table. Read the instructions thoroughly
before using the machine.
7. Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment.
Please watch the enclosed How-to DVD
before using the food processor.
3