Table of Contents
Advertisement
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
10-Cup Food Processor and the accessories for it:
10-cup work bowl, work bowl cover with small and
medium pushers, metal chopping/mixing/dough blade,
reversible slicing/shredding disc medium, reversible
slicing/shredding disc fine, removable stem adapter,
storage hub, base and instruction/recipe book.
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP EDGES.
To avoid injury when unpacking the parts, please follow
these instructions.
1.
Place the box on a low table or on the floor next to
the kitchen counter where you intend to keep the
food processor. Be sure the box is right side up.
2.
Open top flaps—there will be a rectangular block
of packing material that holds the processor parts,
each fitted into a cavity.
3.
Remove the instruction/recipe book.
4.
Lift out the packing material.
5.
Remove the base and bowl and place them on the
counter or table. Read the instructions thoroughly
before using the machine.
6.
Save the shipping cartons and packing material
You will find these very useful if you need to
repack the processor for moving or other ship-
ment.
We recommend that you visit our website,
www.cuisinart.ca, for a fast, efficient way to
complete your product registration.
IMPORTANT
SAFEGUARDS
Always follow these safety precautions when using
this appliance.
Getting Ready
1.
Read all instructions.
2.
Blade and discs are sharp. Handle them
carefully.
3.
Always turn off and unplug appliance from
outlet when not in use, before putting on or
taking off parts, before removing food and
before cleaning. To unplug, grasp plug and
pull from electrical outlet. Never pull cord.
4.
Do not use outdoors.
Core Custom
®
™
5.
Do not let cord hang over edge of table or counter,
or touch hot surfaces.
6.
Do not operate any appliance that has a
damaged cord or plug or after it has been dropped
or damaged in any way. Contact Cuisinart
Consumer Service Center at 1-800-472-7606 for
information on examination, repair, or adjustment.
Operation
1.
Keep hands as well as spatulas and other utensils
away from moving blade or discs while processing
food to prevent the possibility of severe personal
injury or damage to food processor. A plastic
scraper may be used, but only when the food
processor motor is stopped.
2.
Avoid coming into contact with moving parts.
Never push food down by hand when slicing or
shredding. Always use pusher.
3.
Make sure motor has completely stopped before
removing cover. (If machine does not stop within
4 seconds after you remove the bowl cover
assembly, call 1-800-472-7606 for assistance.
Do not use the machine.)
4.
Never store any blade or disc on stem adapter.
To reduce the risk of injury, no blade or disc should
be placed on the shaft except when the bowl is
properly locked in place and the processor is in
use. Store blades and discs as you would sharp
knives, out of reach of children.
5.
Be sure cover and feed tube are securely locked in
place before operating food processor.
6.
Never feed food by hand. Always use the pusher.
7.
Never try to override or tamper with cover interlock
mechanism.
Cleaning
To protect against risk of electrical shock, do not put
base in water or other liquids.
General
1.
This appliance should not be used by or near
children or individuals with certain disabilities.
2.
Do not operate this, or any other motor-driven
appliance, while under the influence of alcohol or
other substances that affect your reaction time
or perception.
3.
This food processor is for household use. Use
it only for food preparation as described in the
accompanying instruction and recipe book. Do not
use this appliance for anything but its intended
use.
4.
When using an approved Cuisinart Food
Processor accessory, read all instructions included
with that accessory.
2
Advertisement
Chapters
Table of Contents
