Error Messages - Ricoh FAX5510L Operating Instructions & Basic Features

Error Messages

The following messages may appear while you are operating or programming
the machine.
Message
Communication error: press the Stop key.
Document Misfeed. Scanned pages have been
deleted.
Memory has reached its limit. Document be-
ing loaded was deleted.
Cannot Print.
Limit reached: replace the Fusing Unit and the
Transfer Roller and clear the counter.
Limit reached: replace the ADF Roller and
clear the counter.
Service call error. Press OK to end alarm.
Problem and Solution
An error occurred during Immediate Trans-
mission. Press the { { { { Stop} } } } key and re-send the
original.
Note
❒ There may be a problem with the machine
or the telephone line (e.g. noise or cross
talk). If the error re-occurs frequently, con-
tact your service representative.
An original jammed during Memory Trans-
mission. Reset originals and scan again.
Transmission has halted because the memory
is full. Use Immediate Transmission.
• Cannot print reports or lists because paper
has run out. Load more paper.
• Paper is jammed. Remove it.
• The side cover is open. Close it.
It is time to install a new Fusing Maintenance
unit.
It is time to install a new ADF Unit Mainte-
nance unit.
There is a problem with the fax function.
Record the code number shown in the display,
and contact your service representative.
Error Messages
4
115