Ricoh FAX5510L Operating Instructions & Basic Features page 84

Programming
Note
❒ If a fax number is already pro-
grammed in this Speed Dial, the
number is shown on the dis-
play. If you want to change the
fax number, press the { { { { Clear} } } }
key and enter another number.
❒ You cannot omit the fax num-
ber. Be sure to program it.
❒ When the Optional ISDN Unit
3
or the Optional Extra G3 Inter-
face Unit is installed, you can
select which line to use (G3 or
G4) before entering the fax
number.
❒ If you make a mistake, press the
{ { { { Clear} } } } key or the { { { { Stop} } } } key
and try again. The { { { { Clear} } } } key
deletes one character at a time,
and the { { { { Stop} } } } key deletes the
whole line.
❒ You can use "Redial" when
specifying the destination. See
p.77 "Redial", <Advanced Fea-
tures>.
❒ To enter "-", press the { { { { Pause/Re-
dial} } } } key.
❒ If you want to program SUB,
SEP, SID, PWD, Sub-address,
and UUI, program them in this
step. See p.78 "SUB/SID (SUB
Code Transmission)", <Ad-
v a n c e d
"SEP/PWD (SEP Code Polling
Transmission)", <Advanced Fea-
tures>, p.82 "Sub-address",
<Advanced Features> and p.83
"UUI", <Advanced Features>.
78
F e a t u r e s > , p . 8 0
Selecting the line
A Press the { { { { Line Selection} } } } key to
select line.
Note
❒ Select G3, G4 or PABX.
❒ When the Optional Extra G3
Interface Unit or the Option-
al ISDN Unit is installed, you
can select the line type for G3
by pressing the User Func-
tion key ({ { { { F1} } } } to { { { { F10} } } } ) in
which the Line Selection
function is assigned. See
p.154 "User Function Keys",
<Advanced Features>.
G G G G
Press [Name].
H H H H
Enter the name.