Immediate Transmission - Ricoh FAX5510L Operating Instructions & Basic Features

Immediate Transmission

Immediate Transmission is conve-
nient when:
• You want to send an original im-
mediately as it is scanning.
• You want to quickly check wheth-
er you have successfully connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the { { { { Start} } } } key. The mes-
sage is scanned and transmitted page
by page without being stored in
memory.
Note
❒ You can only specify one destina-
tion for Immediate Transmission.
❒ When the Backup File Transmis-
sion Setting is on, immediate trans-
mission cannot be used. See p.243
"Backup File Transmission Set-
tings", <Advanced Features>.
A A A A
Check that the Immediate Trans-
mission indicator is lit.
If it is not lit, press the { { { { Transmis-
sion Mode} } } } key.
B B B B
Set your original.
Reference
p.31 "Setting Originals"
C C C C
Select any scan settings you re-
quire. See p.42 "Scan Settings".
D D D D
Specify the destination.
If you make a mistake, press the
{ { { { Clear} } } } key or the { { { { Stop} } } } key, and
then enter the correct number
again.
Reference
p.46 "Dialing"
See p.75 "Chain Dial", <Ad-
vanced Features>.
E E E E
Press the { { { { Start} } } } key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
Reference
p.55 "Own Name/Fax Head-
er/Own Fax Number"
After transmission, the machine
will return to the standby display.
Immediate Transmission
2
39