Getting Started
Note
❒ To return the machine to standby,
do one of the following:
• If you have set the original and
1
have not pressed the { { { { Start} } } }
key, remove the original.
• If you have not set an original,
press the { { { { Clear Modes/Energy
Saver} } } } key.
• If you are in User Tools mode,
press the { { { { User Tools} } } } key.
Communication Display
While the machine is communicating,
the status is displayed.
❖ ❖ ❖ ❖ Display during Memory Transmission
The destination's name or fax
number appears at the top of the
LCD display.
❖ ❖ ❖ ❖ Display during Memory Reception
The destination's name or fax
number appears at the top of the
LCD display.
Note
❒ Even when the machine is sending
o r r e c e i v i n g a f a x m e s s a g e
from/into memory, you can still
scan the next original into memo-
ry.
26
❖ ❖ ❖ ❖ Immediate Transmission:
The destination's name or fax number
appears at the top of the LCD display.
Display Prompts
Depending on the situation, the ma-
chine will show various prompts on
the display.
❖ ❖ ❖ ❖ Instructions and Requests
❖ ❖ ❖ ❖ Questions
❖ ❖ ❖ ❖ Selections
❖ ❖ ❖ ❖ Status