Ricoh FAX5510L Operating Instructions & Basic Features page 54

Faxing
Preparation
You need to assign the Tone func-
tion to a User Function key before-
hand. See p.154 "User Function
Keys", <Advanced Features>.
Limitation
❒ You cannot place a tone before the
2
first digit of a fax number.
❒ Some services may not be available
when using the Tone feature.
Note
❒ A tone is shown as a " • " on the
display.
When Using Tone with On Hook
Dial
A A A A
Press the { { { { On Hook Dial} } } } key.
B B B B
Enter the fax number with the
number keys.
C C C C
Press the User Function key ( { { { { F1} } } }
to { { { { F10} } } } ) in which "Tone"is pro-
grammed.
48
D D D D
Enter a code number for receiving
a special service with the number
keys.
Note
❒ The entered number will be sent
by tonal signals.
- Sending tone signals by ISDN -
- -
(ISDN option Required)
You can still send tone signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
❒ This function can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using Manual Dial. When
only connected to ISDN, you can
use On Hook Dial.
❒ When G4 is selected, the tone mark
" • " appears and UUI is used.
❒ When selecting G3 on ISDN, you
can set whether tone or UUI is
used after the tone mark " • " with
the User Parameters (switch 11 bit
1). See p.178 "User Parameters",
<Advanced Features>.