Troubleshooting; Loading Paper In The Main Paper Tray - Ricoh FAX5510L Operating Instructions & Basic Features

Loading Paper in the Main Paper Tray

If there is no paper in the main paper
tray, the B indicator on the control
panel lights.
Use the following procedure to load
paper.
Important
❒ When loading paper, be careful
not to pinch your fingers inside the
machine.
❒ Before loading paper, make sure
that the machine is not delivering a
copy or a received fax message.
❒ Do not use stapled paper or con-
ductive paper, such as carbon pa-
per or silver coated paper.
Note
❒ You can load up to 500 sheets in
the paper unit.
❒ Regarding paper types and sizes
that can be used, see p.298 "Pa-
per", <Advanced Features>.
A A A A
Pull out the paper tray as shown.

4. Troubleshooting

B B B B
Adjust the dial to match the paper
size.
Important
❒ If the dial does not match the
size and direction of loaded pa-
per, parts of printed images
may be missing and paper jams
could occur.
C C C C
Prepare the new paper, then in-
sert it under the left and right
metal tabs as shown.
Important
❒ Do not stack paper over the lim-
it mark.
D D D D
Gently return the paper unit to its
original position.
103