Ricoh FAX5510L Operating Instructions & Basic Features page 95

Note
❒ If the number of the Group is
not displayed, press [↑ ↑ ↑ ↑ Prev.]
or [↓ ↓ ↓ ↓ Next] to find it.
❒ When you press [Cancel], the
machine returns to the dis-
play in step
F F F F
Press 0 0 0 0 or 1 1 1 1 to select "Normal".
G G G G
Press [Next].
H H H H
Enter the fax number.
Note
❒ You cannot omit the fax num-
ber. Be sure to program it.
❒ Specify a destination in any of
the following three ways:
• Enter fax number using the
number keys.
• Press a Quick Dial key in
which the destination is pro-
grammed.
• Press the { { { { Speed Dial} } } } key
and enter a Speed Dial code.
E
.
❒ If you make a mistake, press the
{ { { { Clear} } } } key or the { { { { Stop} } } } key
and try again. The { { { { Clear} } } } key
deletes one character at a time,
and the { { { { Stop} } } } key deletes the
whole line.
❒ You can use "Redial" when
specifying the destination. See
p.77 "Redial", <Advanced Fea-
tures>.
❒ To enter "-", press the { { { { Pause/Re-
dial} } } } key.
❒ If you want to program SUB,
SEP, SID, PWD, Sub-address,
and UUI, program them in this
step. See p.78 "SUB/SID (SUB
Code Transmission)", <Ad-
v a n c e d F e a t u r e s > ,
"SEP/PWD (SEP Code Polling
Transmission)", <Advanced Fea-
tures>, p.82 "Sub-address",
<Advanced Features> and p.83
"UUI", <Advanced Features>.
Selecting the line
A Press the { { { { Line Selection} } } } key.
Note
❒ Select G3, G4 or PABX.
❒ When the Optional Extra G3
Interface Unit or the Option-
al ISDN Unit is installed, you
can select the line type for G3
by pressing the User Func-
tion key ({ { { { F1} } } } to { { { { F10} } } } ) in
which the Line Selection
function is assigned. See
p.154 "User Function Keys",
<Advanced Features>.
Groups
3
p . 8 0
89