Ricoh FAX5510L Operating Instructions & Basic Features page 83

Note
❒ You can specify codes 00 to 99.
❒ If you install the optional Function
Upgrade Unit, you can program
up to 1,000 numbers in Speed Di-
als. In this case codes 000 to 999 are
used.
❒ Make sure that the machine is in
standby mode before performing
the following procedures.
A A A A
Press the { { { { User Tools} } } } key.
B B B B
Enter the code for "Fax Features"
with the number keys.
C C C C
Enter the code for "Program/De-
lete" with the number keys.
D D D D
Enter the code for "Prog. Speed
Dial" with the number keys.
Note
❒ If it is not displayed, press
[↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E E E E
Enter the Speed Dial code you
want to program using the num-
ber keys.
Note
❒ If you make a mistake, press the
{ { { { Clear} } } } key or the { { { { Stop} } } } key,
and then enter again.
Checking a Programmed Speed
Dial
A Press [Status].
B Enter the Speed Dial code you
want to program using the
number keys.
Note
❒ If the Speed Dial code is not
displayed, press [↑ ↑ ↑ ↑ Prev.] or
[↓ ↓ ↓ ↓ Next] to find it.
❒ When you press [Cancel], the
machine returns to the dis-
play in step
F F F F
Enter a fax number with the num-
ber keys.
Speed Dial
E
.
3
77