ITech IT6341C User Manual page 36

The steps are as follows:
1. Edit and save the LIST file according to the above steps, set the LIST
2. Press the
3. Press the compound key
4. At the end of the run, the

The voltage setting and current setting keys will not be available in LIST
mode.
The steps are as follows:
Note
Output open delay setting (ON DELAY)
Output open delay time (0~10S, step 0.001S), default is 0S.
Output Off Delay Setting (OFF DELAY)
Output off delay time (0~10S, step 0.001S), default is 0S.
Output timer setting (TIME)
This option is used to set the power supply timer with load function. If the
option is Enable, the VFD display "Timer" status symbol is lit, at this time the
power supply output is turned on to start working with load, when the timer
time is reached, the output of the power supply will be automatically turned off.
When the timer time is reached, the output of the power supply will turn off
automatically. If the option is Disable, the timer function of the power supply
will be turned off. The factory setting is OFF.
status to ON, and call the edited LIST file.
button to turn on the power output.
currently edited LIST file to run. At this point, the
trigger.
Exit LIST mode
Exit the instrument from the LIST operating mode by selecting OFF in the
menu LIST > Start.
The LIST output waveform is schematically shown below:
Trigger
Copyright © Itech Electronic Co., Ltd.
(Shift) + (Trigger) to trigger the
key remains lit, waiting for the next
Trigger
Function and Features
key blinks.
27