ITech IT6341C User Manual page 23



Details about key buttons' state:
3.2 Local/Remote Operation Switching
The power supply provides two modes of operation, local operation and
remote operation. The two operating modes can be switched between
communication commands. The initialization mode is the local operation
mode.


refer to chapter of "Descriptions about VFD marks".
If the power supply is in set mode, you can modify parameters using the
knob. If the power supply is in menu operation, the knob is used for menu
selection.
When ,
means they are under corresponding state now. If pressing
(Save),
number to be entered to specify the memory location.
When button is lit, means you can set voltage.
When button is lit, means in current setting mode.
When button is lit, means in recall mode.
When button keeps flickering, means in save mode and waiting for
a number to be entered to specify the memory location.
When button is lit, means current VFD displays actual voltage and
current.
When button is lit, means at least one channel output is on. Or all
channels are in OFF mode.
Note
, ,
Local operation mode: In the local operation mode, all the buttons can be
used. Use the buttons on the front panel to perform related operations.
Remote operation mode: The power supply is connected to the PC, and
the related operation is performed on the PC. When in the remote
operation mode, the other buttons on the panel do not work except the
Meter and Local buttons. You can switch to the local operating mode by
pressing the Local button. When the operating mode is changed, the
output parameters of the power supply are not affected.
Copyright © Itech Electronic Co., Ltd.
, , or
button will keeping flickering and waiting for a
buttons will not be lit at the same time.
Function and Features
buttons are lit,
(Shift)+
14