ITech IT6341C User Manual page 34

the battery.
The factory setting is ON option.
Access group settings (MEM GROUP)
The power supply can use the access group setting to save some commonly
used parameters in 9 x 8 groups of non-volatile memory for users to
conveniently and quickly store/remove the make. For operation details, see
3.7 Access Operation.



Restore settings (RESET)
This option is used to restore the items in the SYST, Protect, and Config
menus to their factory defaults. If the option is YES, the factory defaults are
restored; if the option is NO, the original menu settings remain unchanged.
Sequential operation (List Set)
The LIST operation of the power supply can provide up to 100 steps of
sequence output, and a total of 10 sequence files can be edited. When the
panel edits a List file, please set the trigger method first: Manual (keyboard
trigger)
Press the Compound button
press the left and right buttons to select Trig in the menu and press
to confirm. Press the left and right buttons to select Manual in the menu and
press

Various output change sequences can be generated by editing the value and
time of each single step of the sequence operation. Parameters in the
sequence operation include single step voltage, single step current, single
step time and whether or not to next step, loop step, and whether or not to
save the file.
The steps are as follows:
1. Press the Compound Key
GRP1: Indicates that the stored (taken out) power parameters are saved
in positions 1-9, using the composite key
and then + 1 to 9 numeric keys (with keys
GRP2: Indicates that the stored (removed) power parameters are saved
in the 10-18 position. With the compound key
and then + 1 to 9 number keys (with keys to 1- 9 number keys), Numeric
key "1" means that the stored (removed) power supply parameters are
saved in position 10,At this point, the numeric key "2" means that the
stored (removed) power parameters are saved in position 11.
GRP3-GRP8 By analogy with the above.
to confirm.
Editing the LIST file
operation.
Copyright © Itech Electronic Co., Ltd.
(Shift) +
(Shift) +
(Shift) + Meter (Menu) to enter the menu,
(Shift) + Meter (Menu) to enter menu
Function and Features
(Save)
to 1- 9 numeric keys).
(Save)
25