ITech IT6341C User Manual page 29

3.12 Menu Description
3.12.1 Menu
Press the compound key
function, at this time the VFD shows the selectable menu, you can use the left
and right operation keys or knobs to flip the VFD screen, the following
functions will appear in order.
Pressing the
the location of the screen. Press
OutParam
(RESET)
(OFF)
OutState
Comm (USB)
(Shift) + Meter (Menu) key to enter the menu
key at this point will take you to the function option for
Reset Restore power-on parameters to factory settings
Setting the parameters when the power supply is
Keep
powered up to the last time it was turned off
Setting the output state to off when the power supply
OFF
is powered up
Setting the output state when the power supply is
Keep
powered on to the state when it was last turned off
TMC
USB
VCP
Info
LAN
Config
Copyright © Itech Electronic Co., Ltd.
to return to the previous menu level.
Selectable TMC or VCP
Display LAN interface information
Lan Status: LAN interface status
Lan IP Mode: IP mode
status(DHCP, Manual)
DHCP Status
Lan IP: IP address, default
value0.0.0.0
Lan SubNet: Subnet mask,
default value 0.0.0.0
Lan Gateway: Gateway, default
value 0.0.0.0
Lan MAC: 8C:C8:F4:41:E4:4E
Lan HostName: Host name
Lan HostDesc: Host description
string
Lan TCPIP
Lan Socket Port: Port number,
default value 30000
IP Mode (Configure
parameters. After the modification,
you need to restart the instrument to
take effect.)
DHCP: Automatically set IP related
parameters.
Function and Features
IP related
20