ITech IT6341C User Manual page 30

OFF
Buzzer (ON)
ON
LOCK
KNOB (ON)
Unlock
MANU
TRIG
BUS
(MANUAL)
EXT
Memory Grp1 Grp2
(GROUP1)
Grp3 Grp4
Command SCPI Version
Select...
ITECH
EXT1
EXT2
Return Meter Auto Return
Meter State
OFF
Wait5Sec
NO
RESET
YES
OFF
LIST Start
ON
LIST Load Calling Saved Documents (FILE1-FILE10)
End State
LIST Edit
Repeat
Count
List Step
Copyright © Itech Electronic Co., Ltd.
Manual: Manually set IP related
parameters.
IP: IP address
IP Mask: subnet mask
Gate: Gateway Address
Socket port: Port number
Restore Select whether to reset the LAN to
the default settings or not. And the
settings take effect after restart.
Setting up no sound when pressing the keyboard
Setting up sound when pressing the keyboard
Setting the pulsation knob to lock
Set pulsation knob to on
Trigger mode is local keyboard trigger
Trigger mode is command trigger
Trigger mode is external signal trigger
Access group settings for the user to access the
parameters of the power supply.
SCPI Version Selection
ITECH SCPI command
Extended SCPI command 1
Extended SCPI command 2
Auto Return to Meter State
Function close
The front panel display will change from setting to meter
state automatically after 5s.
Keep the original menu settings unchanged
Restore Factory Defaults
Turn off the LIST test function
Enable LIST test function
Sets the LIST run end state:
OFF: Turns the output off at the end of the run.
NORM: Returns to the voltage and current settings
prior to LIST operation, with the outputs still turned on.
LAST: Stays at the voltage/current setting of the last
STEP of the LIST, with the output still turned on.
Setting the number of cycles for List
1-65535
File
Set the total number of steps in the
1~100
current LIST file
1~COUNT Jump to edit step
Function and Features
21