Infors HT Multitron Operating Manual page 96

Multitron - Operating manual
Operation
7.9 Behaviour in Case of a Power Interruption
Page 96 of 140
If the power supply to the device is interrupted during a running
cultivation process (e.g. by pressing the power switch or in case of
a power failure), all parameters and timer setpoints as well as the
residual time of the last active timer phase are stored.
If the power supply is restored, the device automatically restarts with
the last stored setpoints. If a timer was active prior to the interruption
to power supply, the device restarts with the residual time of the last
active phase and the setpoints stored for this phase.
For your information the
view box. The message can be confirmed by pressing any key.
INFO: RESTARTED message appears on the
27.05.2024