Infors HT Multitron Operating Manual page 27

2.10 Declaration of Decontamination
27.05.2024
When returning the device for repair, disassembly or disposal, a legally
compliant declaration of decontamination is required for the safety
of all involved and due to legal requirements. The following must be
observed if this is the case:
The device, component or accessory which is to be repaired must
■
be entirely decontaminated before being sent to the manufacturer.
The provider is therefore required to completely and truthfully fill
■
out a declaration of decontamination, and have it signed by the
person responsible.
The declaration of decontamination must be affixed on the outer
■
packaging in which the device is sent back.
These forms can be obtained from the licensed dealer or the manu-
■
facturer.
If the return shipment is not accompanied by a signed
and complete declaration of decontamination or it is
not affixed to the outer packaging, the shipment will
be returned unopened to the sender at their expense
(see also T&C).
Multitron - Operating manual
Safety and Responsibility
Page 27 of 140