Start-Up Problems - NEC VERSA 6220 Service Manual

Start-up Problems

The system displays an invalid configuration error message at power on when there are the
following conditions:
T
the current configuration information doesn't match configuration information
stored in Auto Setup, such as when an internal option is added.
T
the system loses configuration information.
If either condition is true, the system displays an "invalid configuration information" mes-
sage.
To continue start-up procedures, press
rameters.
If an error message appears before the operating system starts, look up the error message in
the following table. Follow the instructions. If you see other error messages, the hardware
might need repair.
and run the Setup utility to set current system pa-
F2
NOTE
When the NEC Versa detects an error
related to display devices, it cannot display on
either the LCD or a CRT. The system warns you
by beeping.
Troubleshooting 3-3