Changing Switch Settings; Locating The Speaker Cap Screws; Removing The Speaker Caps - NEC VERSA 6220 Service Manual
Hide thumbs
Also See for VERSA 6220:
- User manual (199 pages) ,
- Service and reference manual (130 pages) ,
- Manual (4 pages)
Table of Contents
Advertisement
Changing Switch Settings
Use the following steps to change switch settings.
Make sure the system is powered off and that no peripheral devices are attached.
1.
Locate and remove the two Phillips-head screws on the bottom of the Versa
2.
6220/30/60 that secure the speaker caps. Put the screws in a safe place for
reassembly.
Figure 2-13 Locating the Speaker Cap Screws
3.
Turn the NEC Versa notebook over and open the LCD panel.
Figure 2-14 Removing the Speaker Caps
Setup and Operation
2-17
Advertisement
Table of Contents
