Removing An Installed Dimm - NEC VERSA 6220 Service Manual

4-14 Field Service Guidelines
If you are replacing a DIMM and need to remove one that is already installed, do
so as follows:
T
Press the locking tabs away from the sides of the DIMM and hold while gently
lifting on the edge of the DIMM.
T
When the edge of the DIMM pops up and is at approximately a 60 degree an-
gle, pull the DIMM from the socket.
NOTE
neath the keyboard.
Figure 4-13 Removing an installed DIMM
The system switches are also located under-