Advanced Cmos Setup; Power Management Setup - NEC VERSA 6220 Service Manual

2-32 Setup and Operation
T
Diskette Drives — Lets you designate the drive type for your diskette drives.
T
Internal Hard Drive — Allows you to enable or disable the internal hard disk
drive in your system. You can also define internal master and slave drives, while
also specifying the LBA, Blk and PIO modes.
T
Docking Station Hard Drives — Enable and disable the hard drives installed in a
docking station. (These options are only available when the NEC Versa is
docked.)
T
System Memory — Displays the amount of system memory installed.

Advanced CMOS Setup

Advanced CMOS settings let you define the following functions.
T
Plug and Play Aware O/S — Selects whether or not the system boots to a Plug
and Play operating system.
T
BootUp USB Configuration — Selects whether or not the system boots to a
USB supported operating system.
T
BootUp Num-Lock — Specifies whether NumLock is On or Off at system
startup.
T
LCD Panel View Expansion — Specifies whether the panel view is reduced/off
or expanded/on.
T
Password Check — Specifies whether the system prompts you to enter a pass-
word when entering BIOS setup, booting the system, and resuming from sus-
pend.
T
PS/2 Port Hot Swap — Specifies whether or not you can swap a PS/2 device
during system operation.
T
Internal Mouse — Specifies whether or not you can use both the internal and the
external mouse.

Power Management Setup

Your NEC Versa uses the Advanced Configuration and Power Interface (ACPI) which en-
ables the operating system to manage the power given to each attached device and to turn
off a device when not in use. In addition, ACPI enables manufacturers to develop comput-
ers that automatically power up with a touch to the keyboard.
The Power Management Setup menu lets you balance high performance and energy conser-
vation using parameters including the following.
T
ACPI Aware O/S — Specifies whether to enable ACPI when a Windows system
supports ACPI.