Start-Up Problems - NEC VERSA NOTE Manual

Problem
Battery power does
not last long.
Information on the
LCD screen is difficult
to see.
The Suspend/Resume
function does not
work.
An optional
component does not
work.

Start-up Problems

The system displays an invalid configuration error message at power on
when there are the following conditions:
T
the current configuration information doesn't match configuration
information stored in Setup, such as when an internal option is added.
T
the system loses configuration information.
If either condition is true, the system displays an invalid configuration
information message.
Troubleshooting
What To Do
The system entered Suspend mode due to low
battery power. Plug in the AC adapter before
resuming operation.
Use power-saving modes.
Fully charge and fully discharge the battery
several times to recondition it. You may need to
use Battery Refresh function under Setup menu.)
Replace the battery.
Adjust the brightness and contrast using the
brightness and contrast controls.
If the system does not Suspend a disk drive
might be busy. Wait until the disk drive stops and
try again.
If system does not resume, it may have auto
suspended on a low battery. Attach the AC
adapter and try again.
If the system still does not Suspend, check that
Auto Play is disabled for the CD-ROM drive.
Make sure the component is securely installed or
connected. Verify that the system parameter for
the I/O port configuration is set correctly in
Setup.
Solving Problems 7-3