Advanced; Security - NEC VERSA 5000 Series User Manual

Advanced

Advanced lets you define specific input/output addresses,
audio settings, and channel numbers. Only change the set-
tings in this section if you are very familiar with the way
that a system uses its resources. Making incorrect setting
decision in this menu can cause your system to malfunction.
Setting incorrect values in the Advanced portion of
the Setup utility can result in a system malfunction.
T
Integrated peripherals — lets you disable, enable, or
manually change COM port and LPT port address and
mode. You can also define the audio I/O address, MIDI
port address, audio IRQ number and DMA channel.
T
Plug & Play OS — displays whether the operating
system on your NEC Versa is plug-and-play operating
system.
T
Large Disk Access Mode — allows you to specify the
large disk access mode to use.

Security

Your NEC Versa 5000 supports a password for system
security. Using the Security screen, you can require that a
password be entered at each startup or boot.
You are not prompted to enter a password until you set an
initial password. Your system is not protected until you set
a password.
NOTE
implemented, the user level cannot access the
diskette drive.
3-10 Using Setup and Power Management
!
CAUTION
If Supervisor and User passwords are both