Table of Contents
Advertisement
In each password field, press
3.
stating that changes were saved appears. Press
again.
The password is no longer enabled.
If you forget your password, proceed as follows.
With system power on, carefully tilt the system on its
1.
side. Using a straightened paper clip or other pointed
object, press in the Password Override Switch on the
bottom of the system.
Reboot and enter Setup. You may receive a Checksum
2.
error message.
Go to the Exit screen and select Get Default Values.
3.
Press
4.
values have been loaded.
3-12 Using Setup and Power Management
Enter
Password Override Switch
. A dialog box informs you that the default
Enter
. The dialog box
Enter
Advertisement
Table of Contents
