Storage Requirements - NEC VERSA 5000 Series User Manual

This equipment uses an ungrounded power cable.
Replace the cord if it becomes damaged. U.S. and
Canadian replacement cords must be UL-approved
(CSA certified in Canada) type SPT-2, 18 AWG, 2-
conductor cord with a permanently attached NEMA
type 5-15P plug at one end, and a permanently at-
tached connector body on the other. Cord length
may not exceed 15 feet. Outside the U.S. and Can-
ada the cord must be rated for at least 250VAC at
10 amps, and must indicate international safety
agency approval. The plug must be a type appro-
priate for the country where it is used.
Obtain replacement cords at an authorized service
center. The replacement must be of the same type
and voltage rating as the original cord.
Disconnect all supply lines before the expansion
memory slot cover is removed. Replace the expan-
sion memory slot cover before the unit is restarted.

Storage Requirements

Store the computer and AC adapter in an environment that
meets the following conditions:
T
Maintain storage temperatures between –20°C and 60°C
(–4°F and 140°F).
1-28 Getting Started
!
CAUTION