Start-Up Problems; Post Error Messages - NEC VERSA 5000 Series User Manual

START-UP PROBLEMS

The system displays an invalid configuration error message
at power on when there are the following conditions:
T
the current configuration information doesn't match
configuration information stored in Setup, such as when
an internal option is added.
T
the system loses configuration information.
If either condition is true, the system displays an "invalid
configuration information" message.
To continue start-up procedures, press
utility to set current system parameters.
If an error message appears before the operating system
starts, look up the error message in the following table.
Follow the instructions. If you see other error messages, the
hardware might need repair.
NOTE
to display devices, it cannot display on either the
LCD or a CRT. The system warns you by beeping.

POST Error Messages

The NEC Versa 5000 has a built-in checking program that
automatically tests its components when you turn the sys-
tem power on. This diagnostic test is called the Power-On
Self-Test (POST). If the system finds a problem during the
POST, the system displays an error message. If this hap-
pens, follow the instructions in the POST error message
table.
When the NEC Versa detects an error related
and run the Setup
F2
Solving Problems 7-3