NEC VERSA 5000 Series User Manual page 24

T
Password Override Switch — This recessed switch re-
moves any settings that you made in the Setup utility,
including your system password.
To remove your password, power on your system. Use a
pointed object, such as a straightened paper clip, to push
in the switch. Power off, then power on to restart your
computer. Go into the Setup utility and set a new
password. Reset any other system settings that you may
have changed.
T
VersaBay Release Lever Cover — Open the release
lever cover to access the VersaBay Release Lever.
Pushing the lever towards the front of the system re-
leases the device currently installed in the VersaBay.
NOTE
Opening the VersaBay Release Lever Cover
immediately puts the system into Suspend mode.
After installing the VersaBay device, close the
VersaBay Release Lever Cover and press the
Power button to resume the system from Suspend.
The VersaBay Release Lever Cover must be closed
to allow the system to return to the active mode.
T
Battery Pack — A Lithium-Ion (Li-Ion) rechargeable
battery pack comes installed in this bay on the bottom of
the NEC Versa.
T
Battery Release Latches — Let you remove the battery
pack installed in the battery bay.
T
Memory Expansion Bay Cover — Pop open the protec-
tive cover to access two RAM expansion sockets for
small outline double inline memory modules
(SO-DIMM). See "Increasing System Storage and
Memory" in Chapter 4 for details on memory expansion.
Getting Started 1-13