Epson EH-QS100B User Manual page 76

Adjusting the Image Resolution
e
Select Image Preset Mode and press [Enter].
f
Select the preset option and press [Enter].
The following settings saved in the preset option are applied to the image.
• Noise Reduction
• MPEG Noise Reduction
• Super-resolution
• Auto Contrast Enhancement
g
Adjust each setting in the projector's Image menu individually as
necessary.
• To reduce flickering in images, adjust the Noise Reduction setting.
• To reduce the noise or artifacts seen in MPEG video, adjust the MPEG
Noise Reduction setting.
• To reduce blurring appeared when projecting low resolution image,
adjust the Super-resolution setting.
• To create a clearer and sharper image by automatically adjusting the
contrast, adjust the Auto Contrast Enhancement setting.
The settings value in the preset option are overwritten.
h
Press [Menu] or [Esc] to exit the menus.
You can also set the Image Enhancement setting in the projector's Image
menu.
76