Epson EH-QS100B User Manual page 123

Input Signal Settings - Signal I/O Menu
Setting Options
Image Processing Auto (ALLM)
Fine
Fast
Reset to Defaults —
EDID EDID (HDMI1)
EDID (HDMI2)
Description
Improves the response speed for images
projected at high speed.
Setting is only displayed when EDID
Mode is set to Up to 4K 60Hz 18Gbps.
• Fine: improves the response speed for
images by selecting Off for Frame
Interpolation.
Image > Frame Interpolation
s
• Fast: disables the Frame
Interpolation, Noise Reduction, and
MPEG Noise Reduction settings.
Image > Frame Interpolation
s
Image > Image Enhancement >
s
Noise Reduction
Image > Image Enhancement >
s
MPEG Noise Reduction
Resets all settings for current input
source.
Describes the display capabilities of
your projector. Change this setting as
necessary according to the resolution of
the image.
You can select the EDID settings
for individual input sources without
changing the input source.
Setting Options
HDMI IN EQ Level HDMI1
HDMI2
HDMI Link Device
Connections
HDMI Link
Power On Link
Power Off Link
Reset Signal I/O —
Settings
Description
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
such as no image being projected occurs,
change the setting.
You can select the settings for individual
input sources without changing the input
source.
Lists the devices connected to the HDMI
ports.
Setting is only displayed when HDMI
Link is set to On.
Set to On to enable the HDMI Link
features.
Controls what happens when you turn on
the projector or connected device.
• Bidirectional: automatically turns on
the connected device when you turn
on the projector, and vice versa.
• Device -> PJ: automatically turns on
the projector when you turn on the
connected device.
• PJ -> Device: automatically turns on
the connected device when you turn
on the projector.
Controls whether connected devices are
turned off when you turn off the
projector.
Resets all adjustment values on the Signal
I/O menu to their default settings.
123