Home Screen; Related Links; Turning On The Projector - Epson EH-QS100B User Manual

Turning On the Projector

• When you turn on the projector for the first time, the initial
setup wizard is displayed. Follow the instructions on the initial
setup wizard screen.
• If no Web Control Password has been set in the Network
Settings menu, the Web Control Password is displayed. Set the
password on this screen. Web Control Password is necessary to
control the networked projectors using a Web browser on the
computer.
• You can also select the Quick Startup setting in the projector's
Operation menu.
Try the following if you do not see a projected image.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source] button on the control panel to detect the source.
• Press the button for the desired video source on the remote control.
• If the Home screen is displayed, select the source you want to project.
Warning
• Never look into the projector lens when the light source is on. This can damage
your eyes and is especially dangerous for children.
• When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
• If the light from the projector is blocked, the area on which the light shines
becomes hot which could cause it to melt, burn, or start a fire. Also, the lens may
get hot due to the reflected light which could cause the projector to malfunction.
To stop projection, turn off the projector.
• When the Direct Power On setting is set to On in the projector's
Operation menu, the projector turns on as soon as you plug it in. Note
that the projector also turns on automatically in cases such as recovery
from a power outage.
• If you select a specific port as the Auto Power On setting in the
projector's Operation menu, the projector turns on as soon as it detects
a signal or cable connection from that port.

Related Links

g
• "Home Screen"
p.39
• "Projector Feature Settings - Operation Menu"

Home Screen

The Home screen feature allows you to easily select an image source and access
useful functions. You can display the Home screen by pressing the [Home]
button on the control panel. The Home screen is also displayed when you turn
on the projector and no signal is being input.
Press the arrow buttons on the control panel or remote control to select a menu
item, and then press [Enter].
39
p.127