Epson EH-QS100B User Manual page 125

Projector Installation Settings - Installation Menu
Setting Options
Geometry —
Correction Wizard
Digital Zoom Various levels
available
Image Shift Various positions
available
Remote Receiver Front/Rear
Front
Rear
Off
Screen Type 4:3
16:9
16:10
Screen Position Various positions
available
High Altitude On
Mode
Off
Source —
Description
Guides you step-by-step through
correcting the image shape.
Adjusts the size of the projected image.
Shifts the image position horizontally and
vertically.
This feature is not available if the Digital
Zoom option is set to the widest setting.
Limits reception of remote control signals
by the selected receiver; Off turns off all
receivers.
Sets the aspect ratio of the screen to fit
the image into the projection area.
Setting is only displayed when Content
Playback is set to Off in the projector's
Operation menu.
Shifts the image position horizontally and
vertically.
This feature is not available if you set the
Screen Type setting to the same aspect
ratio as the projector resolution.
Regulates the projector's operating
temperature at altitudes above 1500 m.
Displays settings saved for each input
source.
To change settings for an input source,
make sure the source is connected and
select that source.
Setting Options
Blanking Top
Bottom
Left
Right
Reset to Defaults —
Install Again —
Reset Installation —
Settings
Related Links
g
• "Focusing the Image Using the Focus Lever"
• "Changing the Projection Mode"
• "Projector Setup and Installation Options"
• "Image Shape"
p.53
• "Resizing the Image with Digital Zoom"
• "Setting the Screen Type"
p.47
Description
Hides an area of the projected image that
you select using the arrow buttons.
Setting is only displayed when Content
Playback is set to Off in the projector's
Operation menu.
Resets all settings for current input
source.
Setting is only displayed when Content
Playback is set to Off in the projector's
Operation menu.
Opens the wizard to adjust the projected
image when re-installing the projector.
Resets all adjustment values on the
Installation menu to their default
settings, except for the following:
• Digital Zoom
• Image Shift
p.52
p.46
p.20
p.62
125