Projector Indicator Status - Epson EH-QS100B User Manual

Projector Indicator Status

The status indicator on the projector displays its current status and notifies you
if an error occurs. Check the status and color of the indicator, and then see the
table for a solution.
When the Indicators setting is set to Off in the projector's Operation
menu, the indicator is off under normal projection conditions.
Status indicator
A
Indicator and status Problem and solutions
Lit blue Normal operation.
Flashing blue Warming up, shutting down, or cooling down.
When warming up, wait about 30 seconds for an image to
appear.
All buttons are disabled during warm-up, shutting down,
and cooling down.
Refresh Mode is in progress.
Management > Refresh Mode
s
Indicator and status Problem and solutions
Preparing for monitoring or quick startup mode. All
features are disabled.
Off Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Flashing orange Laser has a problem.
Turn the projector off, unplug it, and contact Epson for
help.
A fan or sensor has a problem.
Turn the projector off, unplug it, and contact Epson for
help.
Internal projector error
Turn the projector off, unplug it, and contact Epson for
help.
Lit orange Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Make sure the environmental temperature is not too
hot.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the
High Altitude Mode setting to On in the projector's
Installation menu.
• If the problem persists, unplug the projector and
contact Epson for help.
Laser warning
Turn the projector off, unplug it, and contact Epson for
help.
157