Epson EH-QS100B User Manual page 121

Image Quality Settings - Image Menu
Setting Options
Noise Reduction
MPEG Noise
Reduction
Super-resolution
Auto Contrast
Enhancement
Reset
Dynamic Tone On
Mapping
Off
Scene Adaptive Various levels
Gamma available
Description
Reduces flickering in images.
This setting is displayed only when Image
Processing is set to Fine.
Signal I/O > Image Processing
s
Reduces the noise or artifacts seen in
MPEG video.
This setting is only displayed when Image
Processing is set to Fine.
Signal I/O > Image Processing
s
Reduces blurring when projecting low
resolution images.
Creates a clearer and sharper image by
automatically adjusting the contrast of the
projected image.
Resets all adjustment values on the Image
Enhancement setting to their default
settings.
Set to On to optimize the PQ (Perceptual
Quantizer) curve settings based on the
brightness of the projected HDR content.
Improves visibility of dark and bright
images.
This setting is displayed only when
Dynamic Range is set to Auto and Signal
Status is set to HDR10.
Signal I/O > Dynamic Range >
s
Signal Status
Adjusts the coloring according to the
scene, and obtains a more vivid image.
Select a large number to enhance
contrast.
Setting Options
Gamma -2 to 2
Custom
Reset
RGBCMY Various levels
available
Reset to Defaults —
Source —
Aspect See the list of
available aspect
ratios
Reset to Defaults —
Reset Image —
Settings
The Brightness setting does not affect light source brightness. To change
the light source brightness, select the Light Source Brightness Control
setting in the projector's Operation menu.
Related Links
g
• "Adjusting the Image Color"
p.72
• "Available Color Modes"
p.68
• "Available Image Aspect Ratios"
Description
Adjusts the coloring by selecting one of
the gamma correction values, or referring
to a gamma graph.
Adjusts the hue, saturation, and
brightness of each color R (red), G
(green), B (blue), C (cyan), M (magenta),
Y (yellow) individually.
Resets all settings for the current color
mode.
Displays settings saved for each input
source.
To change settings for an input source,
make sure the source is connected and
select that source.
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
This setting is displayed only when the
current source is HDMI.
Resets all settings for current input
source.
Resets all adjustment values on the Image
menu to their default settings.
p.66
121