Epson EH-QS100B User Manual page 133

Projector Network Settings - Network Menu
Setting Options
Authentication
Basic Control On
Off
Remote Password Up to 8
alphanumeric
characters
(do not use * :
spaces)
PJLink On
Off
PJLink Password Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
Description
Selects the security for your projector to
use during Web API communications.
Open: Security is not set.
Digest: Communication is performed
using API authentication (Digest
authentication).
See the Web API Specifications for
Projectors for details.
Set to On to monitor and control the
projector using Basic Control in Epson
Web Control.
This setting is only displayed when
Content Playback is set to Off in the
projector's Operation menu.
Enter a password to access the
projector using Basic Control in Epson
Web Control. (The user name is
EPSONREMOTE. No password is set by
default.)
Set to On to enable the PJLink
notification function.
Enter a password for using the PJLink
protocol for projector control.
You must set the PJLink Password when
using the PJLink function for the first
time.
Setting Options
Notified IP Address Various IP
addresses
AMX Device On
Discovery
Off
Crestron On
Connected
Off
Password Up to 20
alphanumeric
characters
Crestron XiO On
Cloud
Off
Control4 SDDP On
Off
Secure HTTP On
Off
Web Server —
Certificate
Description
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255 (where
x is a number from 0 to 255).
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Set to On only when monitoring or
controlling the projector over the network
using Crestron Connected.
Enter a password to enable Crestron
Connected. No password is set by
default.
Set to On to monitor or control your
projector and other devices over the
network using the Crestron XiO Cloud
service.
Set to On to allow device information
to be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
To strengthen security, communication
between the projector and computer
in Web control is encrypted. When
setting security with Web control, it is
recommended to set this to On.
Imports the Web server certificate for
secure HTTP.
133