Epson EH-QS100B User Manual page 104

Controlling a Networked Projector Using a Web Browser
You cannot change the following settings using Epson Web Control.
• HDMI Link
• Fixed Installation
• Setting Plate Installation Guide
• Image Shift
• Install Again
• Content Playback
• Language
• Display Status
• Reset Network Settings
• Firmware Update
You can select the following settings only with Epson Web Control.
• Initial Setting
• Monitor Password (up to 16 alphanumeric characters)
When performing command communication for the first time, you
must set a password in the web browser.
• IPv6 Settings (manual)
• HTTP port (port number used for Web Control except for 80 [default],
843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000, 10001, 41794)
• Display Logs
Remote (only in Content Playback mode)
Options on the Remote screen allow you to select the input source, control the
projector, and start projecting playlists.
Returns to the Epson Web Control screen.
A
Turns the projector on or off.
B
Selects the input source. (The available sources vary depending on your projector
C
model.)
Turns the video on or off temporarily.
D
Overlay Effect option is displayed when the current source is anything other than
E
USB.
Turns Overlay Effect on or off to add color and shape effects to a playlist.
When turning on, the Effects screen is displayed. You can add predefined color and
shape effect filters to a playlist. You can also create a customized effect.
Specifies the screen settings.
F
Displays your favorite playlists. Select a playlist to start projecting.
G
104