Turning On The Projector - Epson EH-QS100B User Manual

Turning On the Projector

Turn on the computer or video equipment you want to use after you turn on the
projector.
a
Remove the side cover.
b
Connect the power cord to the projector's power inlet and plug it into an
electrical outlet.
Warning
Be sure to connect to ground before plugging in. When you remove the
ground connection, unplug the power cord and disconnect from ground.
The projector's power indicator turns blue. This indicates that the
projector is receiving power, but is not yet turned on (it is in standby
mode).
c
Press the power button on the control panel or remote control to turn on
the projector.
The status indicator flashes blue as the projector warms up. Once the
projector is warmed up, the status indicator stops flashing and turns blue.
38